| ||4-Way Joystick|
| ||X3 CoreMark MCU's|
| ||Up To 5 Hours Run Time|
| ||Built-in Camera Charging|
| ||High Torque Motors|
| ||3.5mm AV Out|
*Charging Cable Not Included
*NEW* Please select your action camera below to ensure you receive the correct mount.
Charging cables are available here.
Featuring 3 easy to use stabilization modes, the EVO GP-PRO gives you the ultimate freedom of motion for your action camera. Replicate the same dolly moves and crane shots seen in multi-million dollar productions.
Tilt & Roll axis are locked. Pan axis rotates smoothly with turn of wrist. Use joystick up & down to control tilt angle of camera.
Tilt, Roll and Pan axis are locked. Use joystick to manually control pan & tilt.
Roll axis is locked. Pan and Tilt axis smoothly follow handle. Use joystick left and right to adjust the horizon angle (dutch).
1 Total run-times vary by usage and configuration.
2 Universal mount compatible with GoPro Hero3 through Hero6 Black. Hero5/Hero6 Black charging cables are a specialty item and sold separately.
IMPORTANT NOTE ABOUT HERO5/HERO6 AUDIO:
The GoPro Hero5 & Hero6 Black's waterproof design and default audio settings have the potential to pick up background noise when mounted to any gopro standard housing including electronic stabilizers. Our gimbals operate at a much higher refresh frequency than competitors which helps to minimize electronic noise however to get the best audio performance with your Hero5 camera it is best to set the Pro-Tune audio to "Wind-Only". If you are vlogging and need very high quality audio we highly suggest using an external microphone or use a separate recording device. If you have not purchased a camera yet we highly reccomend the Garmin Virb Ultra 30 as it has superior audio among all of the action cameras out there.
Stabilization Accuracy: ±0.01°
Follow Accuracy: ±0.2°
Pan Axis Range: -135° to +135°
Tilt Axis Range: -90° to +180° (Inverted)
Roll Axis Range: -45° to +45°
Motor Type: 3x Triple Wound HT Brushless Working Current Static Current: 6.8 mA (at 6.8 VDC)
Dynamic Current: 120mA (at 8.4 VDC)
Max Motor Current: 2A maximum (at 12.6 VDC)
Sensors: IMU module, HD Encoders
Batteries: IMR 18650, 2000mAh x2 (included)
Operating Temperature: -5 to 122°F / -15 to 50°C
Weight: 0.75 lbs / 310g (unloaded)